超声乳化溶剂扩散法制备阿奇霉素超细粉体

超声乳化溶剂扩散法制备阿奇霉素超细粉体 Preparation of Azithromycin Microparticles by Ultrasonic Emulsification Solvent Diffusion Method 龙涛 LONG Tao 1 2 first-author 田熙科 TIAN Xi-ke 1 2 杨超 YANG Chao 1 2 罗东岳 LUO Dong-yue 1 2 费进波 FEI Jin-bo 1 2 皮振邦 PI Zhen-bang 1 2 中国地质大学材料科学与化学工程学院 中国地质大学材料科学与化学工程学院 College of Material Science and Chemical Engineering, China University of Geosciences College of Material Science and Chemical Engineering, China University of Geosciences 中国地质大学材料科学与化学工程学院,湖北,武汉,430074 中国地质大学材料科学与化学工程学院,湖北,武汉,430074 采用超声乳化溶剂扩散法制备了阿奇霉素超细粉体,讨论了溶剂、温度、阿奇霉素浓度以及稳定剂种类和用量等条件对微粉粒径及形貌的影响.实验结果表明,在实验选定的最佳实验条件下（结晶温度0～5℃,阿奇霉素浓度0.03mol/L,1%聚乙二醇（PEG）、乙醇为溶剂）,可制备出平均粒径为500nm的均匀分散阿奇霉素超细粉体. Ultrafine particles of a poorly water-soluble drug, Azithromycin, were produced by a new method, ultrasonic emulsification sovent diffusion. The produce was characterized by SEM and FT-IR. The effect of solvent, time, temperature and stabilizer on the produce’s morphology was studied. The results show that the optimal condition is: crystal temperature 0-5 ℃, duration of action 2 h, stabilizer 1% PEG, concentration of Azithromycin 0.03 mol/L. Under the optimal condition the partice average size of Azithromycin reaches 500 nm. 阿奇霉素 溶剂扩散 超细粉体 超声乳化 Azithromycin sovent diffusion microparticles ultrasonic emulsification TQ465 武汉市科技公关项目（20046001050）;中国地质大学优秀青年教师基金资助项目（CUGQNL030） 2004-06-01 2021-04-01 6